FASS Titanium 100 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins. FASS Titanium 100 GPH Lift Pump. The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. A Titanium Signature Series lift pump also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. Aftermarket lift pumps are important for both daily drivers and high performance applications when looking to improve either fuel economy or increase horsepower/torque. This kit includes two FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fittings function as both a suction and return tube. This new and improved version from our previous Suction Tube Kit allows the user to plum their FASS suction and return line directly to their bulkhead fitting which are mounted directly on the fuel tank module, eliminating all cutting of the filler neck, and significantly speeds up the installation process. Properly installed, you can safely operate down to below 1/8 tank of fuel. The Titanium Signature Series diesel fuel pumps are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of todays quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel Systems high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a whisperwhile at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, thats not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly Polished (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure EXTREME cold weather operations! Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength. FASS Lift Pump Features. Removes Water, Air and Debris From Diesel Fuel. Protects and Extends The Life Of Your Injectors. Improved Cold Weather Starts. Decreases Carbon Monoxide and Carbon Dioxide Emissions. ½ Inch Fuel Lines and Ports. Optional Electric Heater Ports. Optional Fuel Pressure Gauge Port. 30,000 Mile Filter Life Expectancy. Quietest Motor On The Market. Fleece Fuel Filter Delete Kit. With an aftermarket fuel system that bypasses the factory fuel filter, the old filter becomes an eye sore and unneeded clutter under the hood of your truck. The Fleece Fuel Filter Delete mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/18-18 O-ring port for a dual CP3 return line. Fleece Filter Delete Features. Water In Fuel (WIF) Sensor Port. Easy Installation, No Modifications Required. Rudy’s Dual Port Integrated Return Fuel Sump Kit. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy’s sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck. We even include a 3 hole saw for drilling your tank! What sets this sump apart from the other sumps in the Rudy’s lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and “tee” into your factory fuel filler neck. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1/2 hose. Rudy’s Sump Features. No Tank Drop Installation. Stand Pipe Separates Return Fuel & Feed. 3 Hole Saw Included For Easy Installation. Made From Aircraft Grade T6 Billet Aluminum. Works Great With Stock & Aftermarket Fuel Tanks. Note: Not recommended for off-road use or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “FASS Titanium 100 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins” is in sale since Friday, November 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Country/Region of Manufacture: United States
• Custom Bundle: Yes
• Interchange Part Number: 05 06 07 08 09 10 11 12 13 14 15 16 17 18 2005
• California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
• CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
• Compatible Fuel: Diesel
• Manufacturer Part Number: TS D07 100G_FPE-FFD-RO-4G_DP0267
• Fuel Pump Type: Electrical
• Gallons Per Hour (GPH): 100
• Brand: FASS Fuel Systems_Fleece
• Warranty: Lifetime
• Mounting Hardware Included: Yes
• Bundle Description: Fass Titanium Series Lift Pump, RDP Sump & Fleece Performance Engineering Fuel Filter Delete Kit

FASS Titanium 165GPH Lift Pump Sump Fleece Fuel Filter Delete For 05-07 Cummins. FASS Titanium 165 GPH Lift Pump. The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. A Titanium Signature Series lift pump also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. Aftermarket lift pumps are important for both daily drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque. This kit includes two FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fittings function as both a suction and return tube. This new and improved version from our previous Suction Tube Kit allows the user to plum their FASS suction and return line directly to their bulkhead fitting which are mounted directly on the fuel tank module, eliminating all cutting of the filler neck, and significantly speeds up the installation process. Properly installed, you can safely operate down to below 1/8 tank of fuel. The Titanium Signature Series diesel fuel pumps are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get the product out the door. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of todays quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel Systems high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a whisperwhile at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, thats not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly Polished (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure EXTREME cold weather operations! Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength. New Bolt On Bracket Installation. Preset 16-18 PSI Fuel Pressure. Removes Water, Air and Debris From Diesel Fuel. Protects and Extends The Life Of Your Injectors. Improved Cold Weather Starts. Decreases Carbon Monoxide and Carbon Dioxide Emissions. ½ Inch Fuel Lines and Ports. Bulkhead Fitting Suction Tube and Return. Optional Electric Heater Ports. Optional Fuel Pressure Gauge Port. 30,000 Mile Filter Life Expectancy. Quietest Motor On The Market. Fleece Fuel Filter Delete Kit. Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line. Fleece Fuel Filter Delete Features. Fuel Filter Delete Block. WIF Sensor Port Plug (M14x2.0). 9/16-18 O-ring Port Plug. G&R Diesel Billet Aluminum Bottom Sump w/ Integrated Fuel Return. G&R Diesel Billet Aluminum Bottom Sump with Integrated Fuel Return System. The Integrated Return System completely eliminates the need to run the return of your aftermarket fuel pump to the top of the tank or cut into the fuel filler neck, therefore cutting install time tremendously! Simply install the sump, plumb the supply and return lines from your FASS or AirDog pump to G&R Diesel’s sump, and the tank portion of your aftermarket pump is complete! G&R Diesel sump kit now features all O-Ring fittings and no longer requires the use of thread sealant or tape! This sump also features “clamp in o-ring style seal” instead of the competitions ” ring of bolts”. To install this sump you simply drill 1 hole into your tank (hole saw included), slip the clamp into the tank and bolt up the sump. This makes for a quick, easy, leak free bottom sump install. G&R Billet Sump Features. 8an O-ring Port Fittings. Return Stand Tube – This eliminates your return fuel from being drawn back into the supply port. Smallest footprint on the market. 100% Aluminum Contruction, Aluminum Fittings and Stainless Hardware. Open Clamp Design – Reduces cavitaion and vortex as fuel enters the bowl. Note: Not recommended for off-road use or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “FASS Titanium 165GPH Lift Pump Sump Fleece Fuel Filter Delete For 05-07 Cummins” is in sale since Monday, November 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.

• Custom Bundle: Yes
• Interchange Part Number: Pick-up Pickup Truck Fass Fassfuel Fassride
• California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
• CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
• Compatible Fuel: Diesel
• Manufacturer Part Number: TS D07 165G_FPE-FFD-RO-3G_GRD00153
• Fuel Pump Type: Electrical
• Gallons Per Hour (GPH): 165
• Brand: Fass Fuel Systems_Fleece
• Fitment Type: Performance/Custom
• Warranty: Lifetime
• Mounting Hardware Included: Yes
• Bundle Description: FASS Titanium Series Lift Pump, RDP Sump, & Fleece Performance Engineering Fuel Filter Delete Kit

Fleece Performance Billet Rocker Arm Bridges For 1998.5-2019 Dodge Ram Cummins. Fleece Performance Billet Rocker Arm Bridges for 1998.5 + 24v 5.9L/6.7L Cummins (set of 12). 1998.5-2019 Dodge Cummins 5.9L/6.7L 24V Diesel Engines. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Billet Rocker Arm Bridges For 1998.5-2019 Dodge Ram Cummins” is in sale since Thursday, February 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.

• Country/Region of Manufacture: United States
• Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
• Manufacturer Part Number: FPE-BRAB-C1
• Brand: Fleece Performance
• Fitment Type: Performance/Custom

Fix your leaking transmission lines with these heavy duty, high flow, flexible transmission lines. This kit comes complete with everything needed to get the job done right the first time. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Transmission Line Kit For 2010-2012 Dodge Ram 6.7L Cummins” is in sale since Wednesday, April 8, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Country/Region of Manufacture: United States
• Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
• Manufacturer Part Number: FPE-TL-CUMM-1012
• Brand: Fleece Performance
• Fitment Type: Performance/Custom

Fleece Stage 2 Pushrod Set 3/8 For 1998.5-2019 Dodge Cummins 5.9L/6.7L Diesel. Upgraded 3/8 diameter pushrods for Cummins 24V diesel engines. Produced from 4130 chrome molybdenum steel and heat treated to Rockwell Rc60 for outstanding strength and rigidity. These pushrods are designed to stand up to higher valve spring pressure, RPM, and cylinder pressure while minimizing valvetrain deflection. 135 wall, factory length. Robust forged cup ends. 1998.5-2019 Cummins 24V Diesel Engines. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Stage 2 Pushrod Set 3/8 For 1998.5-2019 Dodge Cummins 5.9L/6.7L Diesel” is in sale since Thursday, February 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.

• Country/Region of Manufacture: United States
• Interchange Part Number: 98 98.5 99 00 01 02 03 04 05 06 07 08 09 10 11 12
• Manufacturer Part Number: FPE-CUMM-S2-PROD
• Brand: Fleece Performance
• Fitment Type: Performance/Custom

AirDog II-4G 165 GPH & Fleece Fuel Filter Bypass Kit For 10-18 Ram 6.7L Cummins. The advanced 4G technology offers protection and performance like never before! Our patented air separation, along with a water separator and fuel filter makes sure your expensive injection system components get all the clean fuel they need. The AirDog® II-4G also overcomes loss of power due to driving in higher altitudes. The AirDog® II-4G System Improves Engine Performance by eliminating spray pattern disruption due to air entering the system. This allows the engine to keep its designed injection timing which allows a more complete burn of the fuel entering the cylinder. This increases overall engine efficiency across the power and torque range! Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line. Fuel Filter Delete Kit Includes. Fuel Filter Delete Block. 9/16-18 O-ring Port Plug. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “AirDog II-4G 165 GPH & Fleece Fuel Filter Bypass Kit For 10-18 Ram 6.7L Cummins” is in sale since Friday, January 10, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Country/Region of Manufacture: United States
• Custom Bundle: Yes
• Interchange Part Number: Water Separator
• California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
• CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
• Compatible Fuel: Diesel
• Manufacturer Part Number: A6SABD426/FPE-FFD-RO-4G
• Fuel Pump Type: Lift Pump
• Gallons Per Hour (GPH): 165
• Brand: Air Dog/Fleece
• Fitment Type: Performance/Custom
• Warranty: Lifetime
• Mounting Hardware Included: Yes
• Bundle Description: AirDog Lift Pump And Fleece Fuel Filter Delete Kit

FASS Titanium 165 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins. FASS Titanium 165 GPH Lift Pump. The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. A Titanium Signature Series lift pump also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. Aftermarket lift pumps are important for both daily drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque. This kit includes two FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fittings function as both a suction and return tube. This new and improved version from our previous Suction Tube Kit allows the user to plum their FASS suction and return line directly to their bulkhead fitting which are mounted directly on the fuel tank module, eliminating all cutting of the filler neck, and significantly speeds up the installation process. Properly installed, you can safely operate down to below 1/8 tank of fuel. The Titanium Signature Series diesel fuel pumps are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get the product out the door. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of todays quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel Systems high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a whisperwhile at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, thats not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly Polished (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure EXTREME cold weather operations! Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength. New Bolt On Bracket Installation. Preset 16-18 PSI Fuel Pressure. Removes Water, Air and Debris From Diesel Fuel. Protects and Extends The Life Of Your Injectors. Improved Cold Weather Starts. Decreases Carbon Monoxide and Carbon Dioxide Emissions. ½ Inch Fuel Lines and Ports. Bulkhead Fitting Suction Tube and Return. Optional Electric Heater Ports. Optional Fuel Pressure Gauge Port. 30,000 Mile Filter Life Expectancy. Quietest Motor On The Market. Fleece Fuel Filter Delete Kit. Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line. Fleece Fuel Filter Delete Features. Fuel Filter Delete Block. 9/16-18 O-ring Port Plug. G&R Diesel Billet Aluminum Bottom Sump w/ Integrated Fuel Return. G&R Diesel Billet Aluminum Bottom Sump with Integrated Fuel Return System. The Integrated Return System completely eliminates the need to run the return of your aftermarket fuel pump to the top of the tank or cut into the fuel filler neck, therefore cutting install time tremendously! Simply install the sump, plumb the supply and return lines from your FASS or AirDog pump to G&R Diesel’s sump, and the tank portion of your aftermarket pump is complete! G&R Diesel sump kit now features all O-Ring fittings and no longer requires the use of thread sealant or tape! This sump also features “clamp in o-ring style seal” instead of the competitions ” ring of bolts”. To install this sump you simply drill 1 hole into your tank (hole saw included), slip the clamp into the tank and bolt up the sump. This makes for a quick, easy, leak free bottom sump install. G&R Billet Sump Features. 8an O-ring Port Fittings. Return Stand Tube – This eliminates your return fuel from being drawn back into the supply port. Smallest footprint on the market. 100% Aluminum Contruction, Aluminum Fittings and Stainless Hardware. Open Clamp Design – Reduces cavitaion and vortex as fuel enters the bowl. Note: Not recommended for off-road use or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “FASS Titanium 165 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins” is in sale since Monday, November 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.

• Country/Region of Manufacture: United States
• Custom Bundle: Yes
• Interchange Part Number: 2016 2017 2018 Dodge Cummins Ram Pick Up
• California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
• CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
• Compatible Fuel: Diesel
• Manufacturer Part Number: TS D07 165G_FPE-FFD-RO-4G_GRD00153
• Fuel Pump Type: Electrical
• Gallons Per Hour (GPH): 165
• Brand: FASS Fuel Systems_Fleece
• Warranty: Lifetime
• Mounting Hardware Included: Yes
• Bundle Description: Fass Titanium Series Lift Pump, G&R Sump & Fleece Performance Engineering Fuel Filter Delete Kit

FASS Titanium 165 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins. FASS Titanium 165 GPH Lift Pump. The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. A Titanium Signature Series lift pump also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. Aftermarket lift pumps are important for both daily drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque. This kit includes two FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fittings function as both a suction and return tube. This new and improved version from our previous Suction Tube Kit allows the user to plum their FASS suction and return line directly to their bulkhead fitting which are mounted directly on the fuel tank module, eliminating all cutting of the filler neck, and significantly speeds up the installation process. Properly installed, you can safely operate down to below 1/8 tank of fuel. The Titanium Signature Series diesel fuel pumps are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get the product out the door. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of todays quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel Systems high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a whisperwhile at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, thats not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly Polished (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure EXTREME cold weather operations! Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength. New Bolt On Bracket Installation. Preset 16-18 PSI Fuel Pressure. Removes Water, Air and Debris From Diesel Fuel. Protects and Extends The Life Of Your Injectors. Improved Cold Weather Starts. Decreases Carbon Monoxide and Carbon Dioxide Emissions. ½ Inch Fuel Lines and Ports. Bulkhead Fitting Suction Tube and Return. Optional Electric Heater Ports. Optional Fuel Pressure Gauge Port. 30,000 Mile Filter Life Expectancy. Quietest Motor On The Market. Fleece Fuel Filter Delete Features. Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line. Fuel Filter Delete Features. Fuel Filter Delete Block. 9/16-18 O-ring Port Plug. Beans Diesel Fuel Sump. Uses all available fuel from the tank. No issues with sucking air when below ¼ tank. Perfect for use with today’s high flow lift pump systems. Stand pipe cut into the inside of the sump to reduce the amount of sediments that get to your filter system. Drain Plug for future tank servicing or sediment draining. Single bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank. Stainless Steel hardware and QDC/pushlock fitting provided. Comes with 3 hole saw to make the only hole needed in your tank for install. Inner ring designed to go through the 3 hole so tank does not need to be dropped. O-ring design for a perfect seal. Super strong 1 piece machined billet design. Can be installed on any fuel tank with an available 4 diameter flat area. DESIGNED AND MANUFACTURED AT OUR FACILITY, IN THE USA!! (2) -8 O-Ring Boss (ORB) to 1/2 QDC/Push-lock Fittings (With O-Ring). (1) -8 O-Ring Boss (ORB) Plug For Sumps (With O-Ring). Stainless Steel Plug Fitting. Note: Not recommended for off-road use or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “FASS Titanium 165 GPH Lift Pump Sump Fleece Fuel Filter Delete For 10-18 Cummins” is in sale since Tuesday, November 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.

• Custom Bundle: Yes
• Interchange Part Number: Pick-up Pickup Truck Fass Fassfuel Fassride
• California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
• CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
• Compatible Fuel: Diesel
• Manufacturer Part Number: TS D07 165G_FPE-FFD-RO-4G_280002
• Fuel Pump Type: Electrical
• Gallons Per Hour (GPH): 165
• Brand: Fass Fuel Systems_Fleece
• Fitment Type: Performance/Custom
• Warranty: Lifetime
• Mounting Hardware Included: Yes
• Bundle Description: FASS Titanium Series Lift Pump, Beans Sump, & Fleece Performance Engineering Fuel Filter Delete Kit

Turn over your Cummins with ease with this Cummins Crankshaft Barring Tool. It is much easier to use than the barring tool that interfaces the flywheel housing and starter ring gear. Remove the 4 bolts holding on the damper, install this tool, reinstall the bolts, and torque to spec. You’ll never back a bolt out of the damper when trying to reach TDC and overshoot. They are especially useful when removing and reinstalling a transmission. No need to use a pry bar on the starter ring gear to rotate the engine to R&R converter bolts. Accepts 1/2 drive ratchet. Designed to be used with factory crank bolts and roll pins. No need to remove after installed. Built from 1018 steel. Electroless nickel plated for corrosion resistance. Works with Vibratech Fluidampr as well as factory dampers. Dodge Cummins Turbo Diesel (Stock Crankshaft). The item “Fleece Performance Crankshaft Barring Tool for All Stock Cummins Diesel Engines” is in sale since Tuesday, April 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Crankshafts & Parts”. The seller is “smrdieselperformance_8″ and is located in Colfax, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Interchange Part Number: Cummins
• Manufacturer Part Number: FPE-CCBT
• Brand: Fleece Performance
• Warranty: Lifetime
• MPN: FPE-CCBT

Fleece PowerFlo In-Tank Lift Pump Assembly for Dodge/Ram Cummins 5.9L/6.7L 05-09. The active fill bucket technology eliminates the need for a draw straw or tank sump. The PowerFlo Lift Pump operates with 2 OEM quality gerotor pumps that have surpassed 12,000 hours of durability testing and together flow 170 GPH at 15 psi. This results in the PowerFlo Lift Pump being capable of supporing 800+ raw horsepower! Regulated return flow eliminates over pressure situations. Float and level sending unit properly scaled for accurate fuel level readings. Active fill bucket eliminates the need for tank sumps or draw straws. In-Tank installation provides for silent operation. No more noisy lift pumps, cutting holes in your fuel tank, or quarter tank issues. Ram 2500 Laramie 5.9L Cummins 610. Ram 3500 Laramie 5.9L Cummins 610. Ram 2500 Laramie 6.7L Cummins. Ram 3500 Laramie 6.7L Cummins. Ram 2500 SLT 5.9L Cummins 610. Ram 3500 SLT 5.9L Cummins 610. Ram 2500 SLT 6.7L Cummins. Ram 3500 SLT 6.7L Cummins. Ram 2500 SLT Night Runner Sport 5.9L Cummins 610. Ram 3500 Sport 5.9L Cummins 610. Ram 2500 SLT Sport 5.9L Cummins 610. Ram 3500 Sport 6.7L Cummins. Ram 2500 Sport 5.9L Cummins 610. Ram 3500 ST 5.9L Cummins 610. Ram 2500 ST 5.9L Cummins 610. Ram 3500 ST 6.7L Cummins. Ram 2500 ST 6.7L Cummins. Ram 3500 SXT 6.7L Cummins. Ram 2500 SXT 6.7L Cummins. Ram 3500 TRX4 5.9L Cummins 610. Ram 2500 TRX4 5.9L Cummins 610. Ram 4000 5.9L Cummins 610. 2005, 2006, 2007, 2008, 2009. We are here to assist you! The item “Fleece PowerFlo In-Tank Lift Pump Assembly for Dodge/Ram Cummins 5.9L/6.7L 05-09″ is in sale since Wednesday, May 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “sprint_parts” and is located in Oakland, Michigan. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, French guiana, Guernsey, Jersey, Cambodia, Monaco.

• Brand: Fleece Performance
• Manufacturer Part Number: FPE-34560
• Interchange Part Number: Fleece Performance Engineering 2005 2006 2007 2008 2009
• MPN: Dodge Ram Cummins 5.9L 5.9 59 6.7L 6.7 67
• UPC: 635909314981