For Dodge 03-07 RAM 5.9L Cummins Diesel Engine Manual Coolant Bypass Kit. For 03-07 Dodge Ram Cummins 5.9L Only Manual Transmission! For 07.5-18 Dodge Ram Cummins 6.7L Manual & Automatic Transmissions. Vehicle compatibility charts ar. E for REFERENCE ONLY. Checkproduct type and sizeto match your needs. For the 03-07 5.9L automatic transmission version will eliminate the factory transmission fluid heat exchanger. The heat exchanger is designed for use in cold climates to warm the transmission fluid with the engine coolant. It is not necessary for use in warm climates or high horsepower applications, nor does it detrimentally affect the trucks performance when removed. For model years 07.5-18 6.7L trucks, including both automatic and manual equipped transmissions, factory installed transmission fluid heat exchangers are uncommon. 100% quality assurance tested, more responsive, less expensive, easier to install. Lower coolant temperature at the rear cylinders. Ensure consistent temperatures across all cylinders. Prevent damaging coolant pressure build up. Come with braided hose and AN O-ring fittings to ensure a leak-free installation. Material: made of high quality Aluminum, Metal &Polyester. 1xCoolant Bypass Thermostat Housing and O-ring. 1xThermostat Riser Block and O-ring. 2xCoolant Bypass Hose Fixing Bracket. 2x (M8x1.25, 20mm) Socket Head Cap Screw. 3x (M6x1.00,60mm) Flange Head Bolt. 2x (M12x1.75, 40mm) Flange Head Bolt. (100% Brand New Never Used Or Installed). Drain coolant from radiator. Dislodge the freeze plug out of the rear engine. Clean plug hole surface by scouring pad. Assemble braided hose to thermostat housing. Line up housing to rear hole, push it and bolt it down. Assemble thermostat riser block to the other end of hose with wrench. Put non-O-ringed side of block against the front thermostat. Set stock thermostat on top, 3 bolt to hold them on. Adjust the hose position to fit engine. Install 2 hose fixing brackets or clamps to hold hoseWhy Need a Coolant Bypass? Increased Coolant Flow, Decreased Coolant Temperatures. The rear cylinders on the 5.9/6.7L Cummins suffer from a lack of coolant flow, and therefore, experience the highest coolant temperatures. This can cause excessive pressure to build in the cooling system, especially the rear of the block and blow out freeze plugs externally, or the smaller diameter plugs under the valve cover, leading to a failure. Our coolant bypass kit adds a secondary thermostat, that unlike other brands, works based on temperature instead of excessive pressure. This solves the problem before pressure becomes an issue by ensuring consistent temperatures across all six cylinders. The Coolant Bypass is one of the most important additions you make to improve the reliability and longevity of the Cummins platform. For the long-time holiday, we’ll post the info on our store and reply you automatically via emails. We’ll try our best to help you solve the problem. Your satisfaction is our main concern, so we try ensure your order is perfect in every way. This can be for any of the following reasons. You simply don’t like your item. The wrong item was sent. The order was faulty or damaged. In the result of you wanting to return an item, you have 30 days to do so, in your return please include reason and action you would like to be taken. In the rare case of a faulty item or wrong item received then please get in contact with our customer service team and we will get the problem resolved as quickly as we can.

1993 Dodge Ram 5.9L 12v Cummins diesel Engine Wiring Harness 1st gen. Manual 5 speed Getrag. This is a stock listing. You will receive one in good shape.

Good used condition, please. See pictures for details.

Used Manual – Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions.

Complete with no missing pages. Thanks for looking and good luck!!!!!!

Note: Wires tapped into / cut – See Photos. Pre-Owned – Item comes as pictured. Removed from a 2001 Dodge Ram 3500 5.9L 24V Extended Cab DRW Manual 2WD Transmission. 1998.5 1999 2001 2002 RAM 2500 3500.

1999 Dodge Ram 3500 2wd manual 24V 5.9L Cummins diesel OEM engine harness out of a running & driving truck. Engine harness is in as removed condition aka coated in oil, grease, and dirt. No issues with the truck simply scrapped out due to rust and 330,000 miles. Upon quick review didn’t notice any splices and removed harness as carefully as possible to avoid damage to pins.

Used in good working condition taken off a 05 dodge ram 2500 with a 5.9 cummins and 6 speed manual transmission. Has pin outs and a splice for an exhaust brake. Did not affect functionality (pictured).

Mon – Fri 7:30am – 5:00pm. Closed Saturday & Sunday. 2001 Dodge Ram 2500 Engine Computer 5.9l Cummins Diesel Manual Production Date 2/13/2001 Oem 3947412. This listing may use ARA damage codes, including the following. A = 1 or less units of damage B = 2 or less units of damage but more than 1 C = more than 2 units of damage. A = Less than or equal to 60k miles, or greater than 60k miles but less than or equal to 200k miles and less than or equal to 15k miles per year B = Greater than 60k miles and less than or equal to 200k miles but greater than 15k miles per year C = Greater than 200k miles. AFT = New Aftermarket body part Downgrade = Recycler choose to downgrade the part based on damage not reflected in the grading algorithm.

Cummins ISM Diesel Engine Fuel System Troubleshooting Repair Manual Vol I & II. Brand new, but plastic has tears in it.