Archive for February 5th, 2021

Bully Dog GT Diesel Programmer for SUPER DUTY CUMMINS DURAMAX

Friday, February 5th, 2021
Bully Dog GT Diesel Programmer for SUPER DUTY CUMMINS DURAMAX

Bully Dog GT Diesel Programmer for SUPER DUTY CUMMINS DURAMAX

Bully Dog GT Diesel Programmer for SUPER DUTY CUMMINS DURAMAX. Bully Dog GT Platinum Diesel Performance. Ford, Dodge, RAM, Chevy, & GMC trucks. (F-250, F-350, F-450, F-550). 2007.5-2017 Dodge RAM Cummins 6.7L. 500 HD, 3500, 3500 HD. IMPORTANT: This device’s pre-loaded tunes DO NOT support a DPF or EGR delete. This item is listed separately in our store. IMPORTANT: The Pre-loaded tunes DO NOT WORK with any emissions deletes or similar modifications i. Straight pipe, catalytic converter delete, upgraded cams, headers etc. USE AT YOUR OWN RISK. By writing an aftermarket performance tune to your vehicle’s computer, you assume full responsibility for the proper installation and application of the Product. ILLEGAL FOR USE ON POLLUTION CONTROLLED VEHICLES IN THE STATE OF CALIFORNIA. Bully Dog GT Platinum Diesel Device. OBD II Adapter Plug. SD Card Reader. Mini USB Cable. Dyno Proven Performance. Monitor Vehicle Parameters. Store up to 10 Custom Tunes Not Available for All Vehicles (Tunes NOT Included). Adjustable Options and Monitoring Capabilities. (these vary depending on year & engine, please ask about your specific model’s adjustable options). Control how long the accessory items will remain on after the engine has been turned off and the doors remain closed. Accessory items such as the radio, cigarette lighter, ect. Enable the vehicle to automatically lock all the doors any time it reaches a speed of 15mph. Once the vehicle comes to a stop, if the driver’s door is the first to open, then all other doors will automatically unlock. This gauge option shows the boost. This information is used in defuel settings to reduce the boost when the limit is exceeded. This information is used in warning settings to alarm when the boost limit is exceeded. Current coolant temperature; this information is used for warning level and safety defueling settings. This gauge option shows the coolant temperature in °F or °C. This information is used in warning settings to alarm when the coolant temperature limit is exceeded. Dissable or enable daytime running lights. Be able to use the fog lights and the high beams at the sametime. Set the amount of time that the head lamps remain on after the engine has been turned off. Adjust the length of the horn chirp to either short or long when the vehicle is locked using the remote. Horn Chirp On Lock. The vehicle horn will sound each time the doors are locked by a remote while this feature is enabled. Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicles power system. Set the length of time the vehicle will idle until the engine turns off. Great feature to save fuel to stop continous idling and extend the life of the turbo by allowing it to cool down before the engine shuts off. Increased throttle sensitivity across the full RPM range. Lower soot accumulation in the DPF by manually starting a regeneration at highway speeds. This gauge option shows the engine oil temperature in °F or °C. This information is used for warning level and safety defueling settings. Optical Flash On Lock. The hazard lights will flash each time the doors are locked using the remote when this feature is enabled. Adjust the RPM of the PTO from the unit manually. This gauge option shows the pyrometer temperature. This information is used in defuel settings to reduce the exhaust temperature when the limit is exceeded. This gauge option shows the pyrometer temperature in °F or °C. This information is used in warning settings to alarm when the pyrometer temperature limit is exceeded. Relearn Vehicle Data/Transmission Adaptive Learning. The transmission adaptive learning, (TAL), changes the way the automatic transmission in the vehicle shifts based on driving habits. Turn off seat belt reminder chime. Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster. Lower soot accumulation in the DPF by manually starting a regeneration while parked. Correct the speedometer if you have changed your tire size from stock. Change or disable the Tire Pressure Monitoring System. Change the shift firmness of an automatic transmission. This gauge option shows the transmission temperature. This information is used in defuel settings to help prevent heat damage to the transmission. This gauge option is not available on all vehicles. This information is used in warning settings to alarm when the transmission temperature limit is exceeded in automatic transmissions. Disable this feature so all of the vehicle doors will unlock with one press of the button on the remote. THIS IS A HIGH PERFORMANCE PRODUCT. All Boxes, Cartons Etc. Must be included and in new condition. Must Be In New Condition And Deemed Ready For Resale. Depending On The Circumstances SWAG Will Either Replace Or Credit The Item. Add our store to your favorites to receive newsletters about new items & special promotions! Why shop with us? Powered by SixBit’s eCommerce Solution. The item “Bully Dog GT Diesel Programmer for SUPER DUTY CUMMINS DURAMAX” is in sale since Thursday, June 15, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Performance Chips”. The seller is “swagperformanceparts” and is located in Gallatin, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Powerstroke Cummins Duramax Turbodiesel,
  • CA Legal:: NO, CANNOT SHIP TO CALIFORNIA
  • Manufacturer Part Number: 40420
  • Other Part Number: Performance Computer Chip Horsepower Torque Turbo
  • Brand: Bully Dog
  • Warranty: Yes

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

Friday, February 5th, 2021
FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins

FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins. FASS Titanium 250 GPH Lift Pump. The Titanium Signature Series diesel fuel system was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. Aftermarket lift pumps are important for both daily drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque. This kit includes two FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fittings function as both a suction and return tube. This new and improved version from our previous Suction Tube Kit allows the user to plum their FASS suction and return line directly to their bulkhead fitting which are mounted directly on the fuel tank module, eliminating all cutting of the filler neck, and significantly speeds up the installation process. Properly installed, you can safely operate down to below 1/8 tank of fuel. The Titanium Signature Series diesel fuel systems are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of todays quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel Systems high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a whisper while at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currentsfrom forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, thats not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly Polished (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure EXTREME cold weather operations! Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength. New Bolt On Bracket Installation. Preset 16-18 PSI Fuel Pressure. Removes Water, Air and Debris From Diesel Fuel. Protects and Extends The Life Of Your Injectors. Improved Cold Weather Starts. Decreases Carbon Monoxide and Carbon Dioxide Emissions. ½ Inch Fuel Lines and Ports. Bulkhead Fitting Suction Tube and Return. Optional Electric Heater Ports. Optional Fuel Pressure Gauge Port. 30,000 Mile Filter Life Expectancy. Quietest Motor On The Market. Fleece Fuel Filter Delete Kit. Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line. Fuel Filter Delete Features. Fuel Filter Delete Block. WIF Sensor Port Plug (M14x2.0). 9/16-18 O-ring Port Plug. Rudy’s Dual Port Integrated Return Fuel Sump Kit. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy’s sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck. We even include a 3 hole saw for drilling your tank! What sets this sump apart from the other sumps in the Rudy’s lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and “tee” into your factory fuel filler neck. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1/2 hose. Rudy’s Sump Features. No Tank Drop Installation. Stand Pipe Separates Return Fuel & Feed. 3 Hole Saw Included For Easy Installation. Made From Aircraft Grade T6 Billet Aluminum. Works Great With Stock & Aftermarket Fuel Tanks. Note: Not recommended for off-road use or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “FASS Titanium 250 Lift Pump Sump Fleece Fuel Filter Delete For 07.5-2009 Cummins” is in sale since Friday, November 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Custom Bundle: Yes
  • Interchange Part Number: Pick-up Pickup Truck Fass Fassfuel Fassride
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Compatible Fuel: Diesel
  • Manufacturer Part Number: TS D07 250G_FPE-FFD-RO-3G-67_DP0267
  • Fuel Pump Type: Electrical
  • Gallons Per Hour (GPH): 250
  • Brand: Fass Fuel Systems_Fleece
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime
  • Mounting Hardware Included: Yes
  • Bundle Description: FASS Titanium Series Lift Pump, RDP Sump, & Fleece Performance Engineering Fuel Filter Delete Kit

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Friday, February 5th, 2021
Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM

Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM. We recently acquired the inventory of a large marine parts distributor that went out of business. This is a blemished item and is in good condition, however the factory original packaging wasn’t salvageable. Please note, this Exhaust Manifold does show signs of “shelf rash” from being moved around and stored in a humid warehouse in South Florida. We were able to determine this is a Cummins 3904671 Wet Exhaust Manifold based on the part number located on the unit itself. This manifold is interchangeable with Cummins 3923312. Please see photos for m. Ore regarding the condition. Lease verify compatibility before purchasing. Cummins 3904671 Wet Exhaust Manifold. Please note, this Manifold does show signs of “shelf rash” from being moved around and stored in a humid warehouse in South Florida. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message. We always want to be transparent with our customers and fully disclose any information regarding the products we sell. We always attempt to choose reliable carrier services and package items as safely and securely as possible. Rarely, an accident may happen outside of our control. We will contact the carrier and work with our buyers to come up with the best possible solution. This service takes an average of 4 weeks, but may take longer. Packages may be scanned once in the United States and not scanned again until they are delivered, or may not be scanned at all. The service is reliable, it just is not as fast or traceable as other more expensive methods. Any requests for this type of service will be ignored. Some countries have regulations regarding the dimensions of the packages we can have delivered. Please provide all address information in English. We always prefer to work directly with our customers to correct any issues with an item when possible, if a return may not be necessary please contact our customer service to resolve any issue. The item “Cummins 3904671 Marine Diesel Engine Motor Wet Exhaust Manifold OEMBLEM” is in sale since Friday, September 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Sterndrive Motors & Components\Exhaust System”. The seller is “maxmarineoutlet” and is located in Pompano Beach, Florida. This item can be shipped worldwide.
  • Brand: Cummins 4B 4BT 4BTA
  • Manufacturer Part Number: 3904671 3923312
  • Location: TR 4A


Calendar
Categories